Can Coolers
Keep it Cold.
Frequently Asked Questions
What sizes do HydroJug Can Coolers come in?
Three sizes: the 12oz Slim, an insulated can sleeve built for hard seltzer and sparkling water in slim-format cans; the 12oz Standard for classic 12oz beer and soda cans; and the 16oz for tallboy cans.
What is the difference between a slim and standard can cooler?
A slim can cooler — sometimes called a skinny can cooler — is designed for narrower 12oz cans used for hard seltzer, sparkling water, and energy drinks. A standard can cooler fits the wider, classic 12oz can used for most beer and soda. HydroJug offers both to ensure a snug, secure fit with the screw-top locking lid.
What is the best can cooler for hard seltzer?
The HydroJug 12oz Slim Can Cooler is built for slim-format cans used by most hard seltzer and sparkling water brands. Screw-top locking lid, double-wall stainless steel, rubber base, and cup holder compatible.
Do HydroJug Can Coolers fit in a cup holder?
The 12oz Slim and 16oz Can Coolers are cup-holder compatible, built to fit standard vehicle cup holders. The 12oz Standard fits most cup holders.
What makes HydroJug Can Coolers different from foam can coolers?
A HydroJug stainless steel can cooler outperforms foam in every practical way — better cold retention, a sweat-free exterior, and a much longer lifespan. The screw-top locking lid secures the can in place and prevents spills — something a foam sleeve can't do.
Are HydroJug Can Coolers dishwasher safe?
Yes. All three sizes — 12oz Slim, 12oz Standard, and 16oz — are dishwasher safe. Stainless steel construction holds up to repeated daily use without degrading.
What is the best insulated can cooler?
The right size depends on what you're drinking — 12oz Slim for hard seltzer and slim-format cans, 12oz Standard for classic beer and soda, 16oz for tallboy cans. All three are stainless steel, double-wall insulated, sweat-free, and built to outlast foam.
HydroJug Can Coolers – Insulated Slim, Standard & 16oz Can Cooler
If you've used a standard foam can sleeve for more than a season, you already know the two problems. It slips off. And after enough use, it never quite dries out the same way again.
HydroJug built its Can Cooler lineup to solve both. Stainless steel that keeps your drink cold longer than foam — and holds up long after foam has worn out. A screw-top locking lid that keeps the can exactly where you put it. And a design that fits your life – in the car, at the pool, at the tailgate, and everywhere in between.
What Is the HydroJug Can Cooler?
The HydroJug Can Cooler is a stainless steel insulated can cooler — a permanent upgrade from the standard foam sleeve — available in three sizes: 12oz Slim, 12oz Standard, and 16oz. All three feature a screw-top locking lid, double-wall insulation for a sweat-free exterior, and are dishwasher safe and reusable. The Slim and 16oz models include a rubber base and are cup-holder compatible. All three come in the same signature colorways and seasonal prints as the full HydroJug lineup.
Three Sizes. Every Can Covered.
Not all cans are built the same, and neither are our coolers. Pick the size that fits what you're drinking.
- Fits – 12oz Slim: Slim / skinny cans. 12oz Standard: Classic 12oz cans. 16oz Tallboy: Tallboy / 16oz cans.
- Also called – 12oz Slim: Skinny can cooler. 12oz Standard: Standard can cooler. 16oz Tallboy: Tallboy can cooler.
- Insulation – Double-wall stainless steel, all three.
- Screw-top lid – yes, all three.
- Cup holder ready – yes, all three.
- Rubber base – yes, all three.
- Dishwasher safe – yes, all three.
- Customizable – yes, all three.
All three sizes include a rubber base and are cup-holder compatible.
What's Built Into Every HydroJug Can Cooler
Every size, every colorway — the same features in every HydroJug Can Cooler.
Screw-Top Locking Lid
Most can coolers are just open sleeves. The HydroJug is a can cooler with a lid — the screw-top threads down onto the base and locks the can in place. It doesn't slide off when you set it down, grab it from a cup holder, or move around. It stays locked until you're ready to take the can out.
Double-Wall Stainless Steel Insulation
A vacuum gap between two steel walls prevents heat transfer — locking in cold longer and keeping the outside dry and drip-free. It doesn't compress, absorb moisture, or develop the soggy feel that foam can coolers get after a few seasons. Buy it once and it performs the same two years later as it does on day one.
Sweat-Free Exterior
Condensation on the outside of your can is annoying — and it makes the cooler slippery. HydroJug's stainless steel construction prevents it. Your beer can cooler stays dry throughout the drink — whether it's holding a craft beer or a hard seltzer — so you get a clean grip from the first sip to the last.
Cup Holder Compatible
The HydroJug Can Coolers fit standard vehicle cup holders — cold drink in the console, no adjustments needed. All include a rubber base that adds grip on smooth surfaces: boat decks, countertops, car consoles.
Dishwasher Safe and Reusable
All three sizes are dishwasher safe. Stainless steel doesn't hold odors, doesn't stain, and doesn't degrade the way foam and neoprene do. A reusable can cooler built for daily use — not one you're replacing every summer.
Match Your Can Cooler to the Rest of Your HydroJug
HydroJug Can Coolers come in the same signature colorways and seasonal prints as the rest of the lineup — so your can cooler matches your tumbler, your bag, or your whole setup. Core colors available year-round. Seasonal prints rotate regularly. The Slim and Standard Can Coolers are also available for customization through the HydroJug Customizer — popular for corporate orders, team events, and bulk gifting.
Find Your Can Cooler
Slim, standard, or tallboy — find the right insulated can holder for every can in your lineup.