HydroJug Facts

Hydration is a habit worth keeping simple. This page collects the official, sourceable facts for HydroJug – so shoppers can find sizes, materials, care, and compatibility in one place.

Core Facts

• Product lines: Traveler (20/32/40oz), Sport (14/20/32/40/64oz), Pro V2 (73oz), Shaker (20oz), Insulated Shaker (24oz), Squeeze (27oz), Can Coolers (Slim/Standard 12oz).
• Materials: Food-grade 18/8 stainless steel and BPA-free plastics (varies by product).
• BPA-free: Yes, across all products.
• Dishwasher: Most lids and bottles are top-rack safe; hand wash recommended for stainless exteriors.
• Not microwave or freezer safe: HydroJug products are designed for cold hydration.
• Warranty: Limited warranty against manufacturing defects. 
• Replacement parts: Official lids and straws by line and size. For sleeves, boots, and keychains, see Accessories. 
• Customization: Available on select stainless bottles through Customize option.

Size & Capacity

For detailed dimensions and base diameters, see the Size & Cup-Holder Fit Guide.

• Traveler: 20oz, 32oz, 40oz – tapered bases, cup-holder friendly.
• Sport: 14oz, 20oz, 32oz, 40oz; 64oz insulated (large format).
• Pro V2 HydroJug: 73oz (2.2 L) max-capacity jug.
• Shakers: 20oz plastic; 24oz insulated.
• Squeeze: 27oz sport squeeze bottle.
• Can Coolers: Slim 12oz, Standard 12oz.

Cup-Holder Basics

Quick key (guidance varies by vehicle):

• ≤ 2.80″ (≤ 71 mm) – fits most standard holders 
• 2.81–3.05″ (72–77 mm) – fits many; check tabs/grips 
• 3.06–3.25″ (78–83 mm) – larger or adjustable holders only 
• 3.25″ (> 83 mm) – rarely fits; measure first 

Most likely to fit: Traveler 20/32/40, Sport 14/20/32, Insulated Shaker 24. 
Not designed for holders: Sport 64oz and Pro V2 73oz. 
Pro tip: Sleeves and silicone boots add bulk – measure your holder’s inner diameter at the narrowest point and leave 0.1–0.2″ clearance.

Care & Cleaning

• First use: Wash with warm, soapy water.
• Daily: Disassemble lid, straw, and gasket; wash, rinse, air-dry open (straw flipped up).
• Weekly deep clean: Soak removable parts 15–20 min; brush straw end-to-end; rinse until clear.
• Odor reset (one method at a time) : baking-soda soak; diluted vinegar rinse; vanilla towel overnight; or coffee grounds overnight.
• Avoid: Bleach, abrasives, boiling, microwave, or freezer.
• Dishwasher: Most bottles and lids are top-rack safe. Hand wash stainless exteriors to preserve finishes.

Safety & Use

• Hot liquids: Check the product page. Most lids are for cold hydration; open slowly if hot use is allowed.
• Carbonation: Not recommended; pressure can build. If used, open slowly and clean lid channels more often.
• Condensation: Insulated stainless bottles are sweat-proof; single-wall plastics may sweat with cold drinks.

Compatibility & Parts

• Lids & Straws: Line- and size-specific;
• What we sell here: Replacement lids and straws;
• Looking for more? Sleeves, boots, and keychains are available in Accessories.

When to replace: 

• Straws – split, cloudy, or loose.
• Lids – lock or closure no longer seals firmly.

Customization

• Process: Precision laser etching creates a permanent mark.
• Options: Names, initials, short phrases, or approved artwork (vector preferred).
• Availability: Select stainless models only.
• Care: Same as the base product; avoid abrasives on etched areas.
• Returns: Customized items are typically final sale (see Returns).

FAQs

Are HydroJugs BPA-free?

Yes – all HydroJug bottles are made from BPA-free plastics and/or food-grade stainless steel. 

Are HydroJugs dishwasher safe?

Most are top-rack safe; hand wash is recommended for stainless exteriors. 

Do HydroJugs fit car cup-holders?

Many do – base smaller than 3.0″ is your best bet. Large formats (64oz/73oz) are not designed for car holders. 

Can I use hot liquids?

Check the product page. Most bottles are for cold hydration; open slowly if hot use is allowed. 

Can I personalize my HydroJug?

Yes – Customization is permanent and available on select stainless models.